thinkpad:~ # traceroute www.palmcoder.net
traceroute to www.palmcoder.net (212.13.208.115), 30 hops max, ms 3.231 ms
40 byte packets
|
1 |
192. |
168.1.1 2 |
.734 ms 3 |
|
2 |
217. |
41.132.74 |
17.986 ms |
|
3 |
217. |
41.132.1 |
21.366 ms |
|
4 |
217. |
41.132.106 |
30.135 ms |
|
5 |
194. |
106.33.67 |
34.500 ms |
|
6 |
194. |
106.32.12 |
28.242 ms |
|
7 |
195. |
66.226.103 |
30.782 ms |
|
8 |
194. |
153.169.25 |
34.975 ms |
|
9 |
212. |
13.195.93 |
39.701 ms |
|
10 |
212. |
13.210.20 |
41.606 ms |
|
11 |
sospan.palmcoder.net (212 | ||
18.992 ms 22.553 ms 32.597 ms
22.508 ms
30.509 ms 31.283 ms 35.234 ms
40.441 ms 44.235 ms 13.208.115)
19.735 ms 24.021 ms 33.552 ms 24.022 ms 31.278 ms 32.833 ms 37.647 ms 41.401 ms 45.992 ms 47.959 ms
For each router that traceroute passes, you see the router's IP address and three timings. When the router is queried, the query actually happens three times to allow you to glean an average response time from the router.
Was this article helpful?
Post a comment